THE “CUSTOM PRO” E-30 SPRAY FOAM RIG PACKAGE
28’ X 8’ Extended Height Gooseneck – 20’ on the Floor
- Tandem Torsion Axle, 14,000 lb. with Brakes, Cargo Doors, 24” Stoneguard,
Loading Lights
- 2 Stabilizer Jacks, 36” Curb Side Door, Grey Epoxy Floor, Roof Top Air
Conditioning Unit
- Heated Environment with Insulated Walls & Ceiling, Heated Hose Access Door
- Drum Mounting Station Includes E-Track, E-Track Clips and Ratchet Straps for
Safe and Proper Drum Transport
Graco E30 Reactor Proportioner, 10.2kW Heaters, Wired Three Ø, 50 Amps @
240 V
- Flow Output up to 30lbs. Per Minute, The Most Popular Proportioner for
Roofing and Spray Foam Insulators
- Capable of 2,000 PSI and Accommodating up to 300’ of Heated Hose
Graco Air Purge Fusion Gun (Proven to be the Easiest Gun Used on the
Market)
- Complete with the 01 Mix Chambers (Produces an 11” Round Pattern at 20-24” from Target)
- Weighs only 3.1lbs with Manifold, Easy to Operate and Low Maintenance
300’ of Graco Heated Hoses (Complete with Braided Mesh Scuffjacket)
- 2,750 lb. Rating with Thermocouple Controller that Creates Precision
Chemical Heat Stabilization
10’ Graco Heated Whip (with Gun Manifolds and Scuffjacket)
- Insures Chemical Temperature Stabilization to the Gun, Fatigue Reduction “
FLEX” Design
TM300 Hose Rack (Patented Design used in Tons of our Rig Layouts over
the last 10 Years) Req’s 6’ 8” Overhead
- Easily Accommodates 310’ Heated Hose without the Worry of Damage from Stress
and Hose Overtemp
- Elevated Proportioner Area and Substantially Increases your Rig Footprint
- Improves Rig Aesthetics, Promotes Good Housekeeping and Enhances Maintenance
Procedures
Engine Room with Insulated Dividing Wall (allows cleaner and quieter
conditions during operations)
- Automatic Motorized Louvers ensure proper air flow and engine cooling
44 kW Industrial Grade “DIESEL” Fully Packaged Generator Set, Three
Phase
- Diesel Powered, Built in Fuel Cell w/Gauge, Industrial Muffler ; Shore Power
Inlet for 120V Lights & Accessories
7.5 HP Industrial Grade “ELECTRIC” Air Compressor
- Three Phase, 80 Gallon Register, Head Unloader, Constant Speed
- 23.2 CFM @ 175 PSI; Regulator, Gauge, Liquid Separator and Auto Drain on
Tank
Industrial Grade Refrigerant Air Dryer with Digital Display and Self
Diagnostics
- Permanently bonded Freon plate heat exchanger enhances heat and moisture
separation
- Variable-speed fan further ensures continuous heat removal, includes Auto
Drain
Air Powered Mixer
- (Variable Speed Control for Maximum Chemical Efficiency)
2:1 Fluid Transfer Pumps with Feed Hoses
- Durable Stainless Steel Construction, Maximum intermittent output 3 GPM
Chemical Return Recirculation Assembly with Desiccant Driers
- Provides Proper Drum Ventilation and Assures Moisture Free Operation and
Chemical Stabilization
- Provides Quick Start-Ups unsurpassed by your Competitors and Aids in
Crystallization Prevention
Industrial Grade Cabinetry Station with Work Top
- Heavy Duty Steel Construction, Lockable for added security
Starter Package
- Solvent Flush Kit, Drum Dolly, Non-Sparking 55 Gallon Drum Wrench, Gun
Cleaning Kit, Gun O-ring Kit,
5 Gallon Gun Solvent, Disposable Coveralls, Niosh Approved Isocyanate Half Mask
Cartridge Respirator, Safety Goggles &
Safety Glasses, Rubber & Cotton Gloves, 36” Shaver Blade for ½ lb. Foams, Tools,
Eyewash, First Aid & Fire Extinguishers
EACH UNIT IS CUSTOM BUILT, REQUIRING UP TO 10 DAYS TO MANUFACTURE
Popular Options: (Many Others Available)
____Dynasolve CU6-1 gallon
____Electric Jack with Battery
____Full Recirculation System
____Fusion Gun Basic Rebuild Kit
____Additional Fusion Gun with Mix Chamber (specify size)
____Fusion Gun Front End with Mix Chamber (specify size)
____55 Gallon Drum Heater
____Customized Drum Mounting Station for Two Sets
